IBM System x3750 M4 Type 8733, Installation And Service Manual

Page: 230 / 694

d. Press the edge of the connector on the adapter firmly into the connector on
the system board. Make sure that the adapter snaps into connector
securely.
Attention: When you install an adapter, make sure that the adapter is
correctly seated on the system board before you turn on the server. An
incorrectly seated adapter might cause damage to the system board or the
adapter.
e. Close the adapter retention clip to secure the adapter in place.
f. Go to step 5.
4.
Install the new adapter on the PCIe riser-card assembly ,
a. Make sure that the PCIe retention latch is in the open position.
b. Connect any internal cables to the adapter.
c. Insert the adapter into the riser-card assembly, aligning the edge connector
on the adapter with the connector on the riser-card assembly.
d. Press the edge of the connector firmly into the riser-card assembly. Make
sure that the adapter snaps into the riser-card assembly securely.
Attention: When you install an adapter, make sure that the adapter is
correctly seated in the riser-card assembly and that the riser-card assembly
is securely seated in the riser-card connector on the system board before
you turn on the server. An incorrectly seated adapter might cause damage
to the system board, the riser-card assembly, or the adapter.
PCI riser-card assembly
Adapter
e. Close the adapter retention latch to secure the adapter in place.
f. Install the riser-card assembly in the server (see “Replacing a PCI riser-card
assembly” on page 259).
5.
Connect any external cables to the adapter, if necessary.
6. Perform any configuration tasks that are required for the adapter.
7. Install the cover (see “Replacing the server top cover” on page 207).
8. Slide the server into the rack.
9. Reconnect the power cord and any cables that you removed.
10. Turn on the peripheral devices and the server.
214
System x3750 M4 Types 8722 and 8733: Installation and Service Guide