IBM System x3750 M4 Type 8733, Installation And Service Manual

Page: 488 / 694

806f010d-041fffff The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 31 has been disabled (defunct) due to a fault detected by the controller.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
806f010f-2201ffff The System [ComputerSystemElementName] encountered a firmware hang.
Explanation: IMM has detected a System Firmware Hang.
Severity: Error
Alert Category: System - Boot failure
Serviceable:
Yes
CIM Information: Prefix: PLAT and ID: 0186
SNMP Trap ID: 25
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f011b-0701ffff The connector [PhysicalConnectorElementName] has encountered a configuration error.
Explanation:
IMM has detected Interconnect Configuration Error.
Severity: Error
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0266
SNMP Trap ID: 50
Automatically notify Support: Yes
User response: FPGA Comm Err:
1.
AC cycle the machine.
2.
Update IMM FW to the latest level.
3. (Trained service technician only) If error persists, replace system board.
USB Detect:
1. Reinsert the USB/Video cable.
2. Replace the USB/Video cable.
806f010d-041fffff • 806f011b-0701ffff
472
System x3750 M4 Types 8722 and 8733: Installation and Service Guide