IBM System x3300 M4, Installation And Service Manual

Page: 246 / 470

Table 18. IMM2 error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
4000008a-00000000 Management
Controller [arg1]:
Configuration
restoration from a
file by user [arg2]
failed to start. Info This message is for
the use case where
a user restores a
Management
Controller
configuration from
a file and the
restoration fails to
start. No action; information only.
4000008b-00000000 One or more of the
Storage Management
IP addresses has
changed. Info This message is for
the use case where
an IP address for
the Storage
Management has
changed. No action; information only.
DSA messages
As you run the diagnostic programs, text messages are displayed on the screen
and are saved in the test log. A diagnostic text message indicates that a problem
has been detected and provides the action you should take as a result of the text
message.
The following table describes the messages that the diagnostic programs might
generate and suggested actions to correct the detected problems. Follow the
suggested actions in the order in which they are listed in the column.
228
System x3300 M4 Type 7382: Installation and Service Guide