IBM System x3300 M4, Installation And Service Manual

Page: 196 / 470

Table 18. IMM2 error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
80010202-0701xxxx Numeric sensor
Planar 12V going
low (lower critical)
has asserted. Error A lower critical
sensor going low
has asserted.
1. Check power supply n LED.
2. Remove the failing power supply.
3. Use the IBM Power Configurator
utility to determine current system
power consumption. For more
information and to download the
utility, go to http://www-
03.ibm.com/systems/bladecenter/
resources/powerconfig.html
4. For hot-swap power-supply
systems, follow actions listed in
“Power problems” on page 289 and
“Solving power problems” on page
296.
5. (Trained technician only) Replace
the system board.
( n = power supply number)
80010002-0701xxxx Numeric sensor
Planar VBAT going
low (lower
non-critical) has
asserted. Warning A lower critical
sensor going low
has asserted. Replace the system battery (see
“Removing the system battery” on page
375 and “Replacing the system battery”
on page 377).
80010202-0701xxxx Numeric sensor
Planar VBAT going
low (lower critical)
has asserted. Error A lower critical
sensor going low
has asserted. Replace the system battery (see
“Removing the system battery” on page
375 and “Replacing the system battery”
on page 377).
806f0008-0a01xxxx
806f0008-0a02xxxx The Power Supply
(Power Supply
n )
presence has been
added to container.
(
n = power supply
number)
Info Power supply n
has been added. ( n
= power supply
number)
No action; information only.
806f0009-1301xxxx The Power Supply
(Power Supply
n )
has been turned off.
Info This message is for
the use case when
an implementation
has detected a
Power Unit that
has been Disabled. No action; information only.
178
System x3300 M4 Type 7382: Installation and Service Guide