IBM SAN512B-6, Installation, Service And User Manual

Page: 247 / 286

Removing and replacing the iPDUs
For all racks with serial numbers ending in an alphabetic character, iPDUs for the
directors and other devices are mounted only in the side cutouts. See
“Side-mounted iPDUs” for instructions on removing and replacing side-mounted
iPDUs.
Figure 71 shows the SAN rack with the factory installed iPDUs (
▌2▐
). Each iPDU
has six receptacles (see Figure 74 on page 233.
Item Description Part number
▌2▐
iPDU for director attachment (PN00FW787)
Note: This illustration is for locating the positions of the iPDUs only. The director
door and cable management trays are not installed, and the cables are not
sufficiently organized. Refer to the appropriate director installation and service
guides for information on cable management.
Side-mounted iPDUs
iPDUs are located in the lower cutouts in the left and right sides of the rack.
sj002021
1
2
Figure 71. SAN rack with iPDU locations
Appendix A. SAN rack
223
|
|
|
|
|
|
|
|
|
|
|
|
||||
|||
|
|
|
|
|
|
|