IBM SAN512B-6, Installation, Service And User Manual

Page: 99 / 286

1 - Blade power LED
2 - Blade status LED
3 - Chassis beacon LED
4 - Active (blue) CP LED
5 - 10/100/1000 Mb/s Ethernet port (MGMT) link status LED
6 - 10/100/1000 Mb/s Ethernet port (MGMT) link activity LED
7 - 10/100/1000 Mb/s Ethernet port (SERVICE) link status LED
8 - 10/100/1000 Mb/s Ethernet port (SERVICE) link activity LED
Note: The 10 Gbps Base-T RJ45 Ethernet port, shown below the blade beacon LED,
is reserved for future use.
The following table describes the CP blade LED patterns and the recommended
actions for those patterns.
Table 12. CP blade LED descriptions
LED purpose Color Status Recommended action
Power
Steady green CP blade is on. No action required.
No light (LED is off) CP blade is not on. Ensure that the blade is
firmly seated and has
power.
Figure 28. Control processor blade (CPX6)
Chapter 6. Monitoring the switch
75