IBM SAN512B-6, Installation, Service And User Manual

Page: 249 / 286

Replacing the rack door: Perform the following steps to replace the front or rear
door:
1. Align the door with the hinge pin.
2.
Install the bottom hinge pin (the longest pin) first.
3. Install the top hinge pin (the shortest pin) second.
Relocating the rack
> (> ) 500 lbs. 227 kg.
a69i0333
DANGER
Heavy Equipment - Personal injury or equipment damage may result if mishandled
(D006)
Attention: Refer to “Danger notices” on page xv for safety information regarding
moving the rack. Professional movers/riggers may be required.
CAUTION:
Refer to “Rack safety” on page xx (R001, R002) for weight balance and
loading safety notices before moving loaded racks or racks.
Perform the following steps to relocate the rack:
1. Turn off all power to the rack and the devices installed.
2. Disconnect all power and all device cables.
3. Unbolt the rack from the floor or remove the stabilizers.
4. Raise all the leveling feet.
SJ000659
Latch Mounting Screws
Door Removed for Clarity
Latch
Hinge Mounting Screws
Hinges
Door
Figure 72. Removing the rack door
Appendix A. SAN rack
225
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|