IBM SAN512B-6, Installation, Service And User Manual

Page: 17 / 286

CAUTION:
All devices with AC power sources are intended for installation in
restricted access areas only. A restricted access area is a location where
access can be gained only by service personnel through the use of a
special tool, lock and key, or other means of security.
CAUTION:
Before plugging a cable into any port, be sure to discharge the voltage
stored on the cable by touching the electrical contacts to ground
surface.
CAUTION:
Static electricity can damage the chassis and other electronic devices.
To avoid damage, keep static-sensitive devices in their static-protective
packages until you are ready to install them.
CAUTION:
If you do not install a module or a power supply in a slot, you must
keep the slot filler panel in place. If you run the chassis with an
uncovered slot, the system will overheat.
Cautions related to equipment weight
18-32 kg (39.7-70.5 lbs)
svc00167
CAUTION:
Do not use the port cover tabs to lift the module. They are not
designed to support the weight of the module, which can fall and be
damaged.
18-32 kg (39.7-70.5 lbs)
svc00167
CAUTION:
To prevent damage to the chassis and components, never attempt to
lift the chassis using the fan or power supply handles. These handles
were not designed to support the weight of the chassis.
Danger notices
A Danger statement indicates conditions or situations that can be potentially lethal
or extremely hazardous to you. Safety labels are also attached directly to products
to warn of these conditions or situations.
General dangers
DANGER
The procedures in this manual are for qualified service personnel.
DANGER
Be careful not to accidently insert your fingers into the fan tray
while removing it from the chassis. The fan may still be spinning
at a high speed.
Safety and environmental notices
xv