IBM SAN512B-6, Installation, Service And User Manual

Page: 116 / 286

CP BLADE Slot 2 Inserted at Fri Jun 17 12:05:31 2016
Factory Part Number: 60-1003201-09
Factory Serial Number: DYK0331L00N
psShow
Use this command to display the current status of installed power supplies. The
following is an example of
psShow
output.
chassisX6-8:admin> psshow
Power Supply #1 is OK
V10M03,
DUE2M03M04P ,23-0000163-01,21,DELTA,ECD16020044 ,S1,DUE2M03M
Power Supply #2 is OK
V10L35,
DUC2M35L0CL ,23-0000161-01,31,DELTA,ECD16020042 ,S5,DUC2M35L
Power Supply #3 is OK
V10L41,
DUC2M41L0JJ ,23-0000161-01,32,DELTA,ECD16020042 ,S6,DUC2M41L
Power Supply #4 is OK
V10M03,
DUE2M03M04S ,23-0000163-01,21,DELTA,ECD16020044 ,S1,DUE2M03M
sensorShow
Use this command to display the current temperature, fan, and power supply
status, and readings from sensors located on the device. The
sensorShow command
output is similar to tempShow except that fan and power supply sensor information
is also included. Temperatures are in Celsius only.
The following is an example of sensorShow output.
chassis:admin> sensorshow
sensor
1: (Temperature) is Ok, value is 29 C
sensor 2: (Temperature) is Ok, value is 47 C
sensor 3: (Temperature) is Ok, value is 43 C
sensor 4: (Temperature) is Ok, value is 34 C
sensor 5: (Temperature) is Ok, value is 53 C
sensor 6: (Temperature) is Ok, value is 36 C
sensor 7: (Temperature) is Ok, value is 39 C
sensor 8: (Temperature) is Ok, value is 33 C
sensor 9: (Temperature) is Ok, value is 41 C
sensor 10: (Temperature) is Ok, value is 43 C
sensor 11: (Temperature) is Ok, value is 44 C
sensor 12: (Temperature) is Ok, value is 41 C
sensor 13: (Temperature) is Ok, value is 45 C
sensor 14: (Temperature) is Ok, value is 31 C
sensor 15: (Temperature) is Ok, value is 45 C
sensor 16: (Temperature) is Ok, value is 48 C
sensor 17: (Temperature) is Ok, value is 31 C
sensor 18: (Temperature) is Ok, value is 45 C
sensor 19: (Temperature) is Ok, value is 45 C
sensor 20: (Temperature) is Ok, value is 29 C
sensor 21: (Temperature) is Ok, value is 44 C
sensor 22: (Temperature) is Ok, value is 43 C
sensor 23: (Temperature) is Ok, value is 30 C
sensor 24: (Temperature) is Ok, value is 45 C
sensor 25: (Temperature) is Ok, value is 42 C
sensor 26: (Fan
) is Ok,speed is 6984 RPM
sensor 27: (Fan ) is Ok,speed is 6984 RPM
sensor 28: (Power Supply) is Ok
sensor 29: (Power Supply) is Ok
slotShow
Use this command to display the current status of each blade in the system.
Depending on the option used, the command retrieves information on blade type,
blade ID, status, IBM model name, and power usage for each slot in the switch or
chassis. Use the
-m
operand to display the blade model name and status.
92
SAN512B-6 Installation, Service, and User Guide