IBM Infoprint 6500-v05, Maintenance Manual

Page: 29 / 544

Related Documents
29
About The Printer
The entire system architecture of an IBM Infoprint 6500 line matrix printer is contained on a single controller board. The use of
permanent SDRAM, replaceable flash memory, and PCI expansion slots on the controller board permits rapid access to stored
printer emulations and fast processing of print data. A variable-speed shuttle and precise paper control enable the printer to
print a wide variety of high-volume jobs with minimum maintenance and maximum reliability.
IGP** and Code V** Printronix** emulations are simple but versatile graphics programming languages that load into flash
memory. These printers are therefore excellent bar code and graphics printers.
Although technologically advanced, an Infoprint 6500 printer is easy to use. The operator can select every printer function at
the operator panel or by sending printer control codes in the data stream from the host computer.
The IBM Infoprint 6500 Printer Family
The Infoprint 6500 line matrix printer family consists of pedestal mount and floor cabinet models that print at the speeds shown
in Table 1 on page 30. The print speeds listed in Table 1 are the maximum attainable under controlled test conditions. The print
speed of real print jobs is determined by the interaction of many variables and is rarely a single, unchanging speed.
Infoprint 6500 printers have quiet and efficient black cabinets and pedestals, a new operator panel, and feature the PSA3**
controller board. The PSA3 controller board has faster memory, streamlined architecture, and two PCI expansion slots.
NOTE: Infoprint 6500 printers have a redesigned card cage and input/output ports, making the PSA3 controller board and
associated electronic components incompatible with IBM 6400-i or 6400 printers.
IMPORTANT
When replacing components, be careful to order the correct spares for the model you are servicing.