IBM Infoprint 6500-v05, Maintenance Manual

Page: 345 / 544

Motor Assembly, Platen Open
345
Installation
1. Position the platen open motor assembly with the wires toward the rear (page 416, Figure 46, item 12).
2. Install the 5/16 inch lower motor mount screw and torque it to 30 inch-pounds (3.39 N•m). (See page 416, item 15.)
3. Install the 5/32 inch upper motor mount screw, platen spring post, and platen belt spring (page 416, items 24 through 26)
such that the screw is just loose enough to permit movement of the motor in the slotted side plate.
4. Rotate the motor all the way forward and install the platen open belt and motor pulley.
5. Connect the platen motor cable connector to connector shell P106.
6. Connect shell connector P106 to the controller board and install tie-wraps to secure the motor cable. (See the wire routing
diagrams on page 282 and page 283.)
7. Close the forms thickness lever all the way.
8. Adjust the platen open belt (page 371).
9. Snap the platen open belt cover into the slots in the side plate.
10. Cabinet Model: Install the card cage fan (page 331).
11. Cabinet Model: Install the paper guide assembly (page 348).
Pedestal Model: Install the top cover assembly (page 327).
12. Return the printer to normal operation (page 314).