IBM eServer xSeries 235 Type 8671 Maintenance & Troubleshooting Download | Manualshive

Page: 28 / 214

background image

4. Follow the instructions on the resulting screen to change the settings of the

selected items; then, press Enter. The

Device Properties

and

Mirroring

Properties

choices produce additional screens of parameters to review or

change.

Formatting a SCSI hard disk drive

You can use the LSI Logic Configuration Utility program to perform a low-level
format on a SCSI hard disk drive. Complete the following steps to format a drive:

1. Select the controller channel for the drive to format from the list of adapters.

2. Select

Device Properties

from the resulting screen.

3. Use the arrow keys (

↑

or

↓

) to highlight the drive to format.

4. Use the arrow keys (

←

or

→

) or the End key to scroll to the right.

5. Highlight the

Format

item; then, press Enter to begin the low-level formatting

operation.

Using the ServerGuide Setup and Installation CD

The

ServerGuide Setup and Installation

CD includes an easy-to-use setup and

installation program that is specifically designed for your IBM server. The
ServerGuide program detects the server model and hardware options that are
installed and uses that information during setup to configure the hardware. The
ServerGuide program simplifies operating system installations by providing updated
device drivers and, in some cases, installing them automatically.

If a later version of the ServerGuide program is available, you can download a free
image of the

ServerGuide Setup and Installation

CD, or you can purchase the CD.

To download the latest ServerGuide program, go to the IBM ServerGuide Web page
at http://www.ibm.com/pc/qtechinfo/MIGR-4ZKPPT.html. To purchase the latest

ServerGuide Setup and Installation

CD, see the “ServerGuide Updates” flyer that

comes with your server library, or go to the ServerGuide fulfillment Web site at
http://www.ibm.com/pc/coupon/.

The ServerGuide program has the following features to make setup easier:

v

An easy-to-use interface with online help

v

Diskette-free setup, and configuration programs that are based on detected
hardware

v

Performance Optimizer program, which easily tunes your SCSI RAID adapter
settings for your server environment

v

A system BIOS update program, which updates the BIOS code directly from the
CD

v

Device drivers that are provided for your server model and detected hardware

v

Operating system partition size and file-system type that are selectable during
setup

ServerGuide features

Features and functions can vary slightly with different versions of the ServerGuide
program. To learn more about the version that you have, start the

ServerGuide

Setup and Installation

CD and view the online overview. Not all features are

supported on all server models.

18

xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide

«
...
26
27
28
29
30
...
»

Summary of Contents for eServer xSeries 235 Type 8671























































































































































































































Reviews:

No comments

Related manuals for eServer xSeries 235 Type 8671

Absolute Stream

Brand: Ideon Audio Pages: 24

NPort P5250A Series

Brand: Moxa Technologies Pages: 2

DIGITAL Server 9100 Series

Brand: Digital Equipment Pages: 68

ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER

Brand: Novell Pages: 390

Brand: Vxl Pages: 2

Brand: IOGear Pages: 44

SUPERSERVER 1018D-73MTF

Brand: Supero Pages: 124

System x3550 M3

Brand: IBM Pages: 160

System x3650 M4 Type 7915

Brand: IBM Pages: 192

Brand: IBM Pages: 694

System x3755 M3 7164

Brand: IBM Pages: 126

Brand: Moxa Technologies Pages: 100

Brand: Time Machines Pages: 24

RIP Station 5100

Brand: Epson Pages: 140

ProLiant MicroServer

Brand: HP Pages: 22

ProLiant MicroServer Gen8

Brand: HP Pages: 104

ProLiant DL560 Generation9

Brand: HP Pages: 57

ProLiant MicroServer Generation 8

Brand: HP Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands