IBM eServer xSeries 235 Type 8671, Maintenance & Troubleshooting

Page: 95 / 214

Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If you
suspect a problem with one of these parts, contact a service technician.
Complete the following steps to replace a hot-swap power supply:
1. Review the information in “Installation guidelines” on page 41, “Handling
static-sensitive devices” on page 42, and “Safety information” on page 163.
2. Unplug the power cord from the selected power supply.
3. Remove the old power supply.
Power supply
Power-supply handle
(in open position)
2
1
I/O cable-restraint
bracket
Power-cord restraint
bracket
a. Press the orange release lever and pull the power-supply handle. This
moves the power supply out of the power-supply bay slightly.
b. Pull the power supply out of the bay and set it aside.
Chapter 4. Customer replaceable units
85