IBM 8500R - Netfinity - 8681, Hardware Maintenance Manual, Page: 81 / 290

the parallel-port assignment by using the
Configuration/Setup utility program.
Video port:
The I/O function card in the server has one
SVGA video port. This port is used to attach a video
monitor. The video port has a 15-pin analog connector on
the back of the server. (Refer to “Input/output connectors
and expansion slots” on page 122 for the location of the
connector.)
1 5
11 15
6 10
The following table shows the pin-number assignments for
the video connector.
The integrated video controller has 4 MB of video memory.
The integrated video controller supports the following
screen resolutions:
Ÿ
640
×
480 pels with up to 16,000,000 colors
Ÿ
800
×
600 pels with up to 16,000,000 colors
Ÿ
1024
×
768 pels with up to 16,000,000 colors
Ÿ
1152
×
864 pels with up to 16,000,000 colors
Ÿ
1280
×
1024 pels with up to 64,000 colors
Ÿ
1600
×
1200 pels with up to 64,000 colors
Keyboard and auxiliary-device ports:
The I/O
function card has one keyboard port and one
auxiliary-device port that supports a mouse or other
pointing device. (Refer to “Input/output connectors and
expansion slots” on page 122 for the locations of the
connectors.)
Table 6. Video port pin-number assignments
Pin Signal
1 Red
2 Green or monochrome
3 Blue
4 Not connected
5 Ground
6 Ground
7 Ground
8 Ground
9 Not connected
10 Ground
11 Not connected
12 Not connected
13 Horizontal synchronization (Hsync)
14 Vertical synchronization (Vsync)
15 Not connected
Netfinity 8500R - Type 8681
73