IBM 8500R - Netfinity - 8681, Hardware Maintenance Manual

Page: 190 / 290

Server component fault indicators
Fault Indicator FRU/Action
Memory DIMM
(see“Memory board
component locations” on
page 130 ) 1. DIMM indicated by
the lit LED
Note
Run the
Configuration/Setup
Utility to re-enable
the DIMM slot
following FRU
replacement (see
“The
Configuration/Setup
Utility program”
on page 20).
2. Check system error log
and diagnose any error
messages.
Processor
(see“Processor-daughterboard
component locations” on
page 143 ) 1. Processor indicated
by the lit LED
2. Check system error log
and diagnose any error
messages.
Hard Disk Drive
(see“Controls and
indicators” on page 60 ) 1. Hard Disk Drive
indicated by the lit
LED
2. Check system error log
and diagnose any error
messages.
Processor Fan
(see“Hot-swap fan
installation/removal” on
page 83 ) 1. Processor Fan
indicated by the lit
LED
2. Check system error log
and diagnose any error
messages.
I/O Fan
(see“Replacing an I/O fan”
on page 145 ) 1. I/O Fan indicated by
the lit LED
2. Check system error log
and diagnose any error
messages.
System Management
Adapter
(see“Advanced System
Management PCI Adapter
component locations” on
page 48 ) 1. System Management
Adapter
2. Check system error log
and diagnose any error
messages.
I/O Function Card
(see“I/O function card
component locations” on
page 120 ) 1. I/O Function Card
2. Check system error log
and diagnose any error
messages.
PCI Adapter
(see“Adapters” on page 43
) 1. PCI Adapter indicated
by the lit LED
2. Check system error log
and diagnose any error
messages.
182
Netfinity Server HMM