IBM 8500R - Netfinity - 8681, Hardware Maintenance Manual, Page: 161 / 290

Attention
Before you press the processor into the
connector, make sure that the processor has
the same orientation as the original A1
processor.
c. Insert the processor
.6/
into the guides and
gently press the processor into the connector.
When the processor is correctly inserted, all the
processor heat sinks in both processor cages
face the same direction, toward connector A1.
d. Rotate the processor latches
.3/
until they close
and lock in place.
7. If you plan to install more than one processor, repeat
step 3 on page 151 and step 6 on page 152 in this
section.
8. If you replaced a defective processor, you must
manually enable the processor slot in the
Configuration/Setup utility program. In this case, the
system does not automatically access the
Configuration/Setup utility program to enable the
processor slot. See “Processor settings” on page 31
for additional information.
9. If you are installing a processor daughterboard,
continue with “Installing or replacing a processor
daughterboard.”
If you are not installing a processor daughterboard,
continue with the following steps.
10. Reinstall the processor-cage cover by inserting the
cover tabs into the slots on the top of the processor
cage.
11. Turn the four plastic fasteners on the processor-cage
cover until they are in the locked position (one
quarter-turn). You may use a flat-blade screwdriver
or a coin.
Attention
Do not lift the processor housing assembly by the
latches.
12. Reinstall the processor housing assembly as
described in “Reinstalling the processor housing
assembly” on page 159.
Installing or replacing a processor
daughterboard:
You will need to install a second
processor daughterboard if you plan to use more than four
processors in the server. The additional processors must
be installed on an optional processor daughterboard. Or,
you might need to replace a processor daughterboard.
Refer to the following illustration while you perform the
steps in this section. In this illustration, the standard
processor cage is installed in the processor housing
Netfinity 8500R - Type 8681
153