IBM 8500R - Netfinity - 8681, Hardware Maintenance Manual

Page: 57 / 290

Battery replacement
IBM has designed this product with your safety in mind.
The lithium battery must be handled correctly to avoid
possible danger. If you replace the battery, you must
adhere to the following instructions.
Caution
When replacing the lithium battery, use only IBM Part
Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If your system
has a module containing a lithium battery, replace it
only with the same module type made by the same
manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
Ÿ
Throw or immerse into water
Ÿ
Heat to more than 100°C (212°F)
Ÿ
Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
In the U.S., please call 1-800-IBM-4333 for information on
battery disposal. To order replacement batteries, call
1-800-388-7080 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside
the U.S. and Canada, call your IBM reseller or IBM
marketing representative.
Before you begin, be sure you have:
Ÿ
Read “Safety information” on page 240 and
“Handling electrostatic discharge-sensitive
devices” on page 244.
Ÿ
Follow any special handling and installation
instructions supplied with the replacement
battery.
After you replace the battery, you must reconfigure your
server and reset the system date and time.
To replace the battery:
1. Turn off the server and peripheral devices, and
disconnect all external cables and power cords (see
“Preparing to install options” on page 134); then,
remove the top cover (see “Removing the top cover”
on page 136).
2. Remove the I/O function card from the server:
a. Refer to the following illustration while you
perform the steps in this procedure.
Netfinity 8500R - Type 8681
49