Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 21 / 86

20
Taking into account these principles, most of the machining errors a
prevented achieved good penetration and given the necessary space for
the chip
With the simultaneous cutting of Workpieces are these like a single piece
considered and their total length taken into account.
The accompanying table gives instructions for a right choice, However, from
Operator based on their own experience can be modified.
Although there are saw blades with regular tooth spacing can be obtained
through Saw blades with variable tooth spacing.
(Tooth groups with different distance from each other) is used to reduce
the vibration and noise generation and improve final product and the
chipping.
Recommended
Gearing
Full
material
Diameter
(mm)
Large
Wall
thickne
ss
(mm)
Profile
Wall
thickness
( mm)
Bundle
section
length
Ref
Variable Constant