Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 36 / 86

35
cover.
Tighten the belt tensioning screw until the green light comes on. About it does not
loosen, tighten another quarter turn on.
This procedure must also be in a saw band (after changing the tooth pitch, wear,
fractures) are executed. In these cases, all must
Parts that come in contact with the tape, be thoroughly cleaned.
1.Screw band voltage
2.holder cover
4 FUNCTION AND DESCRIPTION OF
This model has a fixed control panel.
The control panel is very easy to use and helps the operator with
Error displays when something does not work.
The control panel has the following device:
1) Lockable main switch.
2) Control panel with display, buttons and switches
3) Emergency stop button
1.main switch
2.ammeter
3.indicator light - 24V