Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 30 / 86

29
10.2.3 illuminating the work area
Insufficient lighting can cause injury to the operator,
therefore, the work area must be adequately illuminated. If no exact
Regulations (eg ISO 8995, EN 1837) for special rooms available, we
recommend a lighting of 750 LUX.
11 OPERATION MECHANICAL ENGINEERING, APPLIED
STANDARDS,OPERATING MODES
This is a semi-automatic metal cutting band saw with hydraulic feed
Takes you cuts from 0 ° to 60 ° left and 45 ° right of profiles and
Solid materials made of metal.
It is not suitable for wood and similar materials (see Machinery Directive
89/392, Appendix. I, Section 2.3).
The methods are performed manually, are:
* Material Clamp
* Down movement of the saw frame
* Start
* Adjust the blade speed
* Adjust the feed rate
* On motion of the saw frame
* Solve the material and moving the rod for a new cut.