Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 22 / 86

21
distribution division
14 M42
1,5max
10/14 M42 10M42
1 bis 2
8/12 M42 8 M42 20max 2 bis 4
6/10M42 6M42 40max 4 bis 8
5/8 oder 5/7 m42 5M42 30 bis 80 6 bis 12 50 bis 100
4/6 M42 4M42 40 bis 90 10 bis 20 70 bis 120
3/4 M42 oder M51 3M42 oder
M51
70 bis 150 15 bis 25 100 bis 200
2/3 M42oder M51 2 M42oder
M51
120 bis 230 Ober25 120 bis 300
The following applications relate to the cutting of solid material with
a diameter of 80 mm with a sawing machine with default properties.
If the material is small, you can increase this parameter, where in the
type the saw and installed accessories may be taken into account, eg
ESC (Electronic Speed Control).
In contrast, if the material is larger, you have to reduce these parameters
wherein the type of the saw and installed accessories may be taken into
account, for example, ESC (Electronic Speed Control).