Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 54 / 86

53
18 EINLAUFEN DER MASCHINE
The required for the machine maintenance is required to the for proper operation and to
maintain the original obligations to the
To ensure time. In the first period of their operation must also some additional work is carried
out to ensure that all machine parts may shrink properly.
The operation of the machine is often monitor exaggerated sectional should be avoided.
During the first 80-100 hours of operation, the oil level in the gearbox must be checked: When
the engine is running and fully raised bracket must be the oil up to half of the visual object.
19 DISPOSAL OF USED / PRODUCED RESIDUES
We point out that the existing statutory provisions for the disposal
following materials are complied with:
*consumables used by the machine
( e g oil for hydraulic circuits for gear reduction gear for Cooling lubrication systems, etc.)
* generated during machining waste or no longer usable Material (such as iron and Non-ferrous
chips, tools such as band saw blades, discs, etc.)
*substances used in cleaning and maintenance
*materials only occasionally used (eg for packaging, transportation, etc.)
It is recommended that the packaging for transportation in the future the
Machine or for their return delivery to the vendor or - within the
Warranty period - is kept to customer service.
20 STÖRUNGSER ID
Most occur during operation of the machine interference can
Reference are determined in this chapter. The first part refers to the
Operation of the machine and includes a list of possible faults and the relevant checks to be
carried out.
The second part relates to the disturbances of our audit of the saw band and / or
cut work piece can be determined. If the fault in the list specified, or it cann’t be solved only
by qualified personnel, you must contact the manufacturer or the seller and on this manual
apply.