Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 24 / 86

23
10. INTENDED USE AND CONTRAINDICATIONS
The machine can perform working cycles, at the end of each of the
commitment of the
Operator is required to replace the work piece, and the cut
May alter or restart the cycle cutting conditions = SEMI-AUTOMATIC CYCLES
So many times when the machine is performed manually, and other
Phase in which it automatically executes the operation (in which Is limited
operator or monitoring). The duty cycle ends with the stop of the machine
movement, then the process must start repeatedly to start a new cycle
10.1
The machine was made so that there is no danger for the operator,
may
arise, provided that the machine used as intended will be. All built-in