background image

PRS-012

WARRANTY

OZITO 

Australia/New Zealand (Head Office)

 

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

0318

SPECIFICATIONS

Input:  

18V

Stroke Length: 

20mm

No Load Speed: 

1500-2800spm

Max. Cutting Diameter:  60mm (with clamping jaw) 
 

 

80mm (w/o clamping jaw)

Weight:  

1.2kg

STANDARD EQUIPMENT

Cordless Pruning Saw

CORDLESS

PRUNING SAW

INSTRUCTION MANUAL

ozito.com.au

PXCPRSS-018

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU 

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS 

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER 

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND 

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE 

WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and 
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to 
a replacement or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and the failure 
does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under this 
warranty, however, where you have suffered any additional direct loss as a result of 
a defective product you may be able to claim such expenses by contacting our 
customer service helpline above.

WARNING

The following actions will result in the warranty being 

void.

•   If the tool has been operated on a supply voltage other  

than that specified on the tool.

•   If the tool shows signs of damage or defects caused  

by or resulting from abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of 
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it 
will be replaced in accordance with the terms of this warranty. 

Lithium Ion 

batteries and chargers are covered by a 36 month 
warranty

 Warranty excludes consumable parts, for example: blade and included 

accessories.

1 x Saw Blade

Summary of Contents for PowerXchange PXCPRSS-018











Reviews: