Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 26 / 86

25
performance.
7 - Install only tools that the specified minimum requirements correspond
8 - Do not cut workpieces with dimensions, the values given exceed.
9 - Tools and unnecessary items from the work area while servicing.
10.Receive operation only when all guards are properly
11.Suitable work clothes: baggy sleeves, necklaces, chains, ties, avoiding
the oversized gloves and other items that are in the get into the machine,
long hair must be tied together.
12 -Maintenance work or regulation of the machine, always be taken plug
from the socket (in any case, the be separated machine from the power
supply).
13 -Keep away hands and body parts during the cutting process from the
cutting zone
14 -Check that the workpiece is actually excited when the vise is
automatically closed, and tha the clamping pressure is correct.
15 The support material is on both sides of the cut appropriately so cann’t
not be fallen down, we recommend the installation of the corresponding
16.-Roll passage on the discharge side when the material to be cut is
longer than the distance between the blade and the right edge of the
base.when cutting short components, make sure that this is jamming after