Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 50 / 86

49
1.Schraube belt tension
2.Holder cover
16.1 Regular work
Daily or more often in highly-demanding machine:
Remove filings and turnings from the machine, the smallest parts in the
Transport chip tray which has to be removed and emptied, the Check and top up
coolant level, check the condition of the saw band and
replace if necessary, the belt cleaning brush and the drive ring against the
Disc presses control. Replace if corroded or the distance from the saw regulate.
Weekly
Clean the machine, all joints and sliding surfaces with oil or grease, lubricate,
check the oil level in the reservoir of the hydraulic unit: In machine is switched off,
unscrew the
nozzle, clean the dipstick and without him to screw again, check that the oil reaches
up to 3 cm from the edge.