Huvema HU 300 HAC-4 Topline, Instruction Manual

Page: 49 / 86

48
A valve for the saw arm, a pressure relief valve, the motor of the Pump / filter /
splitter is.
Feed speed
Turn the knob from 0 to the desired maximum value to the Speed with which penetrates the
band saw blade into the work piece to It must be taken into account:
* to be cut work piece, the saw blade speed
* Work piece shape, dimensions of the work piece and its clamping
* Refrigerant
* Saw blade condition, etc.
16 USER MAINTENANCE
The works cited are to be performed regularly in order to the manufacturer
characteristics foreseen in terms of technology, safety and performance as possible
long to obtain.
Saw band
This is the most common maintenance operation, since the band saw blade during the
operation deteriorated:
* Move the saw arm in the position under
* open it and lock the blade guard this
* remove the front blade guard and solve it the screw (1) for the blade tension
* remove the saw blade from the guides and take them there then by the guide rollers
* clean the guides
*When installing the new saw blade to go in reverse order and Make sure that the saw blade
is properly inserted in the guides.
* Tighten them. Tape and remove the protective edge
Wear it to the saw band always safety gloves!