Huawei SmartLogger3000 User Manual Download Page 277

Page: 277 / 305

Local Maintenance

Description

Prerequisites

Exporting All Files

Before replacing the

SmartLogger, export the

SmartLogger

configuration file to a

local PC.

N/A

Importing All Files

After replacing the

SmartLogger, import the

local configuration file to

the new SmartLogger.

After the import is

successful, the

SmartLogger restarts for

the configuration file to

take effect. Ensure that

the parameters on the

Settings tab page and

the parameters for the

built-in MBUS are

correctly set.

All exported files have

been saved in the root

directory of the USB

flash drive.

Step 3 After the local maintenance is complete, remove the USB flash drive.

NO TICE

After files are imported, the SmartLogger automatically restarts.

----End

Connecting to a USB Flash Drive to Export Device Logs

Step 1 Connect the USB flash drive to the USB port on the SmartLogger.

Step 2 Log in to the app as installer, choose More > Device Logs, select the device

whose logs you want to export, and tap Next.

Step 3 Select the types of logs to be exported and tap Confirm to start exporting device

logs.

Step 4 After the logs are exported, remove the USB flash drive.

----End

Connecting to a USB Flash Drive for Device Upgrade

You can upgrade the SmartLogger, solar inverter, MBUS module, or PID module

using a USB flash drive.

Step 1 Save the device upgrade package to the USB flash drive.

SmartLogger3000

User Manual

8 FAQ

Issue 10 (2022-08-20)

265

Summary of Contents for SmartLogger3000


















































































































































































































































































































Search results

Summary of Contents for SmartLogger3000

Reviews:

Huawei SmartLogger3000, User Manual, Page: 277 / 305

Search results

Summary of Contents for SmartLogger3000

Reviews: