Table 6-4 Management System
Parameter
Description
Server
Set this parameter to the IP address or domain name of
the Management System.
Port
Set this parameter based on the connected Management
System.
Address mode
The value can be Comm. Address or Logical address.
If the communications address of the device connected to
the SmartLogger is unique, you are advised to select
Comm. Address. In other cases, you must select Logical
address.
TLS encryption
Retain the default value Enable.
NOTE
If this parameter is set to Disable, data exchange between the
SmartLogger and the management system will not be encrypted,
which poses security risks.
TLS Version
Set this parameter based on the connected Management
System. TLS1.2 or a later version is recommended.
Second challenge
authentication
Set this parameter based on the connected management
system.
NOTE
If this parameter is set to Disable, the second challenge
authentication result is not checked, and user data may be stolen.
Therefore, exercise caution when setting this parameter.
Security certificate
Optional. Set this parameter only when the certificate has
expired or the customer needs to use their own certificate.
Figure 6-35 Setting management system-1 parameters
Table 6-5 Management System-1
Parameter
Description
Server
Set this parameter to the IP address or domain name of
Management System-1.
SmartLogger3000
User Manual
6 WebUI Operations
Issue 10 (2022-08-20)
Copyright © Huawei Technologies Co., Ltd.
105