Parameter
Description
Device Type
Set this parameter to STS.
Port number
Set this parameter to the number of the COM port
connected to the STS.
Address
Set this parameter to the communications address of
the STS.
Step 2 Choose Monitoring > STS, set device monitoring parameters and click Submit.
Tab
Function
Description
Teleindication
Views the status parameters
of the device, such as the
switched-on or switched-off
state.
N/A
Telemetering
Views the real-time data of
the device, such as the
voltage.
N/A
Telecontrol
Sets status control
parameters, such as the
parameter for controlling
switch-on or switch-off.
Set this parameter as
required.
Performance
Data
Views or exports the
performance data of the
device.
N/A
Running Param.
Sets the standby signals for
teleindication, telemetering,
and teleadjust.
Set this parameter as
required.
Active Alarm
Queries active alarms.
N/A
About
Queries communication
information.
N/A
Step 3 Choose Settings > Other Parameters and set STS overtemperature protection
as required.
----End
6.3.19 Setting IEC103 Device Parameters
Description
An IEC103 device supports two data transmission modes:
●
Transparent transmission mode: When connecting to the management
system, the SmartLogger transparently transmits the IEC103 device
SmartLogger3000
User Manual
6 WebUI Operations
Issue 10 (2022-08-20)
Copyright © Huawei Technologies Co., Ltd.
180