Parameter
Description
Read mode
The value can be Multiple read or Single read.
Start address
If Read mode is set to Multiple read, set the start
address for reading.
End address
If Read mode is set to Multiple read, set the end
address for reading.
Signal parameters
NOTE
Signal parameters
include Signal Name,
Signal address, Gain,
Offset, and Unit.
Set these parameters based on the vendor protocol.
NOTE
If the EMI can collect a signal, set Signal address for the
signal to the corresponding register address. If the EMI
cannot collect a signal, set Signal address for the signal to
65535.
----End
6.3.17.2 Setting AI EMI Parameters
Procedure
Step 1 Set access parameters and click Add Devices.
Figure 6-55 Setting access parameters
Parameter
Description
Device Type
Set this parameter to EMI.
Connection mode
Set this parameter to AI.
Address
Set this parameter to the
communication address of the EMI.
Step 2 Choose Monitoring > EMI > Running Param., set running parameters and click
Submit.
SmartLogger3000
User Manual
6 WebUI Operations
Issue 10 (2022-08-20)
Copyright © Huawei Technologies Co., Ltd.
178