RRU3832&RRU3632
Installation Guide
12 Appendix
Issue 05 (2014-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Figure 12-4
Stripping the sheath off each core wire
Figure 12-5
Matched length
Step 4
Add a tool-less female connector (pressfit type) to two core wires.
1.
Tighten the screws using a Phillips screwdriver, as shown in
Figure 12-6
Tightening screws
2.
Connect the blue core wire labeled NEG(-) to the
-
port and the black/brown core wire
labeled RTN(+) to the
+
port on the tool-less female connector (pressfit type), and then
tighten the screws using a Phillips screwdriver, and then use a torque screwdriver to
tighten the M4 screws to 1.4 N·m (12.39 lbf·in.), as shown in
