RRU3832&RRU3632
Installation Guide
8 Installing the RU
Issue 05 (2014-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
Tighten the nuts on the two square-neck bolts alternatively. After the main and auxiliary
brackets are secured properly, measure the spacing between the brackets on both sides and
ensure that the spacing is the same on the two sides.
Figure 8-30
Securing the RU mounting brackets
Step 4
Use an inner hexagon screwdriver to remove the attachment plate from one side of the RU,
reinstall the attachment plate onto the rear of the RU, and tighten the four stainless screws to 5
N·m (44.25 lbf·in.), as shown in
Figure 8-31
Installing the attachment plate onto the rear of the RU
Step 5
Install the RU onto the main bracket, as shown in
