Huawei IDS1000 User Manual Download Page 36

Page: 36 / 67

IDS1000 Container Data Center
User Manual

4 Routine Maintenance

Issue 01 (2014-3-15)

Huawei Proprietary and Confidential

Maintenan
ce Item

Operation

Expected
Result

Troubleshooting

controllers for alarms. generated.

see the emergency operations for
the fire extinguishing system.

4.3 Weekly Maintenance

Maintenan
ce Item

Operation

Expected
Result

Troubleshooting

Fire
extinguisher
s

Check whether the fire
extinguishers are in
good condition.

Check the validity
period of fire
extinguishers.

The fire
extinguishers
are in good
condition and
within the
validity
period.

If a fire extinguisher is not in
good condition or has expired,
replace the fire extinguisher.

Gas extinguishers are optional for the container data center. The weekly maintenance tasks may vary
with the fire extinguishers you use.

4.4 Monthly Maintenance

Maintena
nce Item

Operation

Expected Result

Troubleshooting

Appearance
of
cabinet-type
gas
extinguisher
components
, including
the
extinguishin
g agent
vessel,
solenoid
valve
driver,
pipes, and
nozzles

Check all
components of
the cabinet-type
gas
extinguishers.



The components are
free from mechanical
damage.



The components are
free from rust and
corrosion, the
protective coating is
intact, and the
nameplate is clear.



The protective cover,
lead seal, and safety
signs on
hand-operated
devices are intact.



Devices, pipes,
supports, and
hangers in the
extinguishing agent

If components are bent due to
collision, contact Huawei
technical support.

Summary of Contents for IDS1000




































































Search results

Summary of Contents for IDS1000

Reviews:

Related manuals for IDS1000

Brands by name

Popular brands

Huawei IDS1000, User Manual

Search results

Summary of Contents for IDS1000

Reviews:

Related manuals for IDS1000

Brands by name

Popular brands