IDS1000 Container Data Center
User Manual
1 Configuration Description
Issue 01 (2014-3-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Component Name
Configuration Principle
VESDA
Determine the model and quantity of VESDAs based on the size
of the protected zone.
VESDA power box
Determine the quantity of VESDA power boxes based on the
quantity of VESDAs. Each VESDA is configured with one power
box.
Gas extinguishing
equipment
Determine the quantity of gas extinguishing equipment based on
the size of the protected zone.
Fire extinguishing
pipe
After ensuring that extinguishing agents can be transported to the
entire protected zone swiftly and evenly, deploy the pipes flexibly
based on the layout of the protected zone.
Atomizer nozzle
Installed on fire extinguishing pipes based on the size of the
protected zone.
Gas release indicator
Configured at the entrance or exit of the protected zone (one to
two in general).
Audible and visual
alarm
Configured based on the size of the protected zone (one to two in
general).
Emergency start/abort
switch
Configured at the entrance or exit of the protected zone (one in
general).
Heat detector
Configured in couple with a smoke detector based on the size of
the protected zone.
Smoke detector
Configured in couple with a heat detector based on the size of the
protected zone.
Alarm bell
Configured based on the size of the protected zone (one to two in
general).
For details about how to configure the container data center fire extinguishing system, see
the corresponding descriptions in the
Container Data Center Initial Configuration Guide
.
A VESDA is optional in the fire extinguishing system. If it is not configured in the
practical solution, ignore the relevant VESDA descriptions in this document.
A gas extinguisher is an auxiliary device in the fire extinguishing system. If it is not
configured in the practical solution, ignore the relevant gas extinguishing equipment
descriptions in this document.
