FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
246
Figure 6-4
Adding access permissions
You can authorize and delete access users in batches.
3.
Click
OK
to complete the task of adding access management settings.
4.
On the
Authorization Operations
tab page, click
Synchronize to Device
, select the
modified access control devices, and click
Start Synchronization
.
Figure 6-5
Synchronizing access permissions
5.
When
Synchronization Status
is
Synchronized
for the related devices, close the
Synchronize Access Permission
page.
Step 2
Set an alarm for card readers.
Set
Logical level configuration for reader removed
based on the fingerprint reader
configured for the access control system.
If the access control system uses a
Card and password
reader, choose
Monitoring
>
Aisle
>
Access Actuator Group
>
Access Actuator n
on the ECC800 WebUI, click
