FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
245
Figure 6-3
Adding access users
On the
Authorization Information
and
Term of Authorization
tab pages, select access
users whose access permissions are to be set, and set
Authorized Device
,
Authorization
Mode
,
Cabinet Lock
,
Start time
, and
End time
.
−
Access Actuator: Select the authorized access actuator for the user based on the
actual requirements. For example, select
Access Actuator1
on the
Access Actuator
tab.
−
Authorization mode: Select
Card
,
Fingerprint
,
Card and password
,
Card and
fingerprint
,
Fingerprint and password
, or
Card, password and fingerprint
For example, if you select
Card, password and fingerprint
for the authorization mode, the door
can be opened only after you swipe an authorized card first, enter the authorized password (press #
to confirm the password), and then scan the fingerprint.
The fingerprint information is used only for configuring the access control function and is not used
for other purposes. The fingerprint information is encrypted during transmission in the ECC800 to
ensure that the personal data of users is fully protected.
−
Cabinet lock: Select a type on the
Cabinet Lock
tab page, for example,
Smart
module
>
IT Cabinet1
>
E–LOCK1
.
−
Permission validity period: Set
Start date
,
Expiration date
, and
Allow door open
period
.
