Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 3 Installing Cabinet and Cabinet Equipment
Huawei Technologies Proprietary
3-13
2)
Wear an antistatic wrist strap and ground it by inserting its grounding plug to the
antistatic jack on the side door post of the cabinet.
3)
Check whether there are any tilted, missing or broken pins on the backplane.
z
If any pin is tilted, straighten it. Use the sharp-nose pliers to straighten pins in
the case of emergency.
z
If any pin is missing or broken, replace the backplane.
4)
Make sure the ejector levers on the front panel are in the state as shown in
Figure 3-12.
Figure 3-12
Installing a board (1)
5)
Hold the upper ejector lever on the front panel with one hand and uplift the board
with the other. With reference to the name on the nameplate, put the board on the
corresponding guide rail.
6)
Hold the two ejector levers and insert the board along the guide rail gently till it is
in position.
7)
Turn the two ejector levers towards the middle of the panel simultaneously to fix
the board. See Figure 3-13.
