Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 3 Installing Cabinet and Cabinet Equipment
Huawei Technologies Proprietary
3-2
(1) Lug
(2) Mount angle
Figure 3-1
Cabinet bearing points
3.1.2 Leveling Cabinet
To level the cabinet, proceed as follows:
1)
Use a level bar to check the levelness of the cabinet in both the latitudinal and
longitudinal directions.
2)
Observe whether the level vial is in the middle of the level bar.
z
If there is no error, fasten the cabinet by following the instructions in section
3.1.3 "Fastening Cabinet".
z
If an error exists, lift the cabinet.
3)
Adjust the levelness by adding washers between the cabinet and base, as shown
in Figure 3-2 and Figure 3-3.
