Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 5 Installing Cables
Huawei Technologies Proprietary
5-50
Table 5-9
Description of cables in battery cabinet
Cable name
Cable description
Positive cable
The positive cable of the battery cabinet is a black GND cable
of 121 mm (4.76 in.) long.
Negative cable
The negative cable of the battery cabinet is a blue –48 V cable
of 121 mm (4.76 in.) long.
Connecting cable
of storage battery
The connecting cable of the storage battery in the battery
cabinet is a black cable. It is used to connect the adjacent two
storage batteries and put in different layers to connect storage
batteries or in the cabinet to connect the front and back storage
batteries.
Access control
and temperature
sensor cable
The access control and temperature sensor cable is a 4-pin
cable. One end of the cable has four naked wires, and the other
end has a 2-pin socket and two naked cables. These four
cables are white, green, red and black cables. Figure 5-52
shows the size of cables.
PGND cable
The PGND cable of the storage battery is a yellow-green cable
(cross-sectional area: 16 mm
2
(19.14 ft
2
)).
(1) 2-pin socket
(2) Main label
W1: White cable
W2: Green cable
W3: Red cable
W4: Black cable
Figure 5-52
Access control and temperature sensor cable
5.10.2 Installing Internal Cables of the Battery Cabinet
To install internal cables of battery cabinet, proceed as follows:
1)
Connect cables between modules in the same shelf according to the silk screen in
the front door of the battery cabinet according to Figure 5-53.
