Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 2 Installing Cabinet Base or Channel Steel
Huawei Technologies Proprietary
2-11
(1) Cement plinth
(2) Base
(3) Washer
(4) Square taper washer 12
(5) Big plain washer 12
(6) Spring washer 12
(7) M12 x 70 bolt
Figure 2-13
Fastening the base of battery cabinet
2.4 Installing Channel Steel
This section introduces the procedure of installing the channel steel, including:
z
Laying out installation position
z
Casting cement plinths
z
Preparing the channel steel
z
Positioning the channel steel
z
Drilling holes and installing expansion bolts
z
Fastening the channel steel
Note:
The cross section of the channel steel must be 200 mm (7.87 in.) x 73 mm (2.87 in.) x 7
mm (0.28 in.).
If the equipment is installed inside a building or on the top of a building, the bearing
capacity of the building must be verified according to the weight and installation
position of the equipment. If the bearing capacity is insufficient, reinforce the building.
