The Power Management feature enables the workstation to enter a low-power (or “sleep”) mode after a
period of inactivity. When used with an external monitor that is ENERGY STAR qualified, this feature
also supports the similar power management features of the external monitor.
To take advantage of this energy savings:
●
The Power Management feature has been preset to suspend the workstation to a sleep state after
30 minutes of inactivity.
●
The Power Management feature has been preset to suspend the monitor to a sleep state after 15
minutes of inactivity.
Both the computer and monitor can be woken from sleep mode through user interaction with any of the
computer input devices (mouse, keyboard, and so on). when configured with Wake On LAN (WOL)
enabled, the workstation can also be woken by a network signal.
See the EPA ENERGY STAR Power Management Web site for more information about the energy and
financial savings potential of the Power Management Feature:
http://www.energystar.gov/
powermanagement
.
See the EPA ENERGY STAR Web site for more information about the ENERGY STAR program and its
environmental benefits:
http://www.energystar.gov
.
CAUTION:
Using the Energy Save Monitor feature with monitors that are not ENERGY STAR
qualified can cause video distortion when an Energy Save timeout occurs.
NOTE:
ENERGY STAR is not supported on Linux workstations.
If it is necessary to restore the operating system, you must also reset the ENERGY STAR settings (if
applicable) after the restore.
To verify the factory default power settings for your workstation, select
Start>Control Panel
, and
then double-click
Power Options
.
NOTE:
ENERGY STAR is not supported with the optional 600W power supply.
ENWW
Workstation specifications
13
