manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 96

Description

Pool type

Status message

The target and source cartridges have the same contents.

Echo Copy

Up To Date

Waiting for the backup application to update the source cartridge
by appending or overwriting the cartridge over the SAN. A
cartridge will get into this state when the barcode for the source
cartridge already existed on the source VLS when the (LBR) Echo
Copy pool was created and the source cartridge contained data.
It is not possible to replicate that preexisting content in a deduplic-
ated manner.

Echo Copy

Waiting for Backup Data

The cartridge has been loaded into a drive by the backup applic-
ation.

Echo Copy

In Use

Creating deduplication instructions.

Echo Copy

Backup Postprocessing

The source virtual cartridge has been updated by the backup
application since the target cartridge was updated. Instruction
creation is complete.

Echo Copy

Out of Sync

Waiting to acquire resources to run the job to synchronize the
target cartridge with the source cartridge.

Echo Copy

Mirror Scheduled

Mirroring from the target cartridge to the source cartridge.

Echo Copy

Mirroring

A problem was encountered mirroring the cartridge.

Echo Copy

Mirror Broken

Mirroring from the source cartridge to the target cartridge.

Echo Copy

Restoring

Ejecting the target cartridge and about to put the source cartridge
into the firesafe.

Echo Copy

Eject Pending

About to eject the target cartridge and then put the source cart-
ridge into the firesafe.

Echo Copy

Mirror/Eject Pending

Synchronizing the cartridge in the Destination Library with the
source virtual cartridge. When the mirror job is complete, the
target cartridge will be ejected and the source cartridge will be
moved to the firesafe.

Echo Copy

Mirroring before Eject

Gathering deduplication instructions needed for replication using
tape transport.

Echo Copy

Export Preprocessing*

Copying content from the source cartridge onto a physical tape.

Echo Copy

Exporting*

Copying content from the source cartridge will continue on another
physical tape.

Echo Copy

Partially Exported*

Waiting for the remaining cartridges in the pool to finish export-
ing.

Echo Copy

Export In Use*

Importing status on the destination library, In Sync status on the
source VLS.

Echo Copy

In Transit/Importing*

Importing status on the destination library, loaded into a drive by
the backup application the source VLS.

Echo Copy

Importing/In Use*

Importing status on the destination library, creating deduplication
instructions on the source VLS.

Echo Copy

Importing/Backup Postpro-
cessing*

Automigration/Replication

96

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands