manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 274

Figure 108 Installing the node hard drive

.

NOTE:

The replacement drive is automatically configured to RAID 1 — no administrator action is required.

DVD-CD Drive

CAUTION:

To prevent improper cooling and thermal damage, do not operate the node unless all bays are
populated with either a component or a blank.

1.

Power off the node.

NOTE:

The ejector button for the CD-ROM drive is recessed to prevent accidental ejection; it may
be helpful to use a small, flat, blunt object, such as a key or pen, to push the ejector button.

Component Replacement

274

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands