manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 77

LAN/WAN libraries. See “Managing a SAN Library” on page or “Managing a LAN/WAN Replication
Library” on page .

An unmanaged library is a library that is not recognized by and using automigration or replication.
The process for unmanaging destination libraries is the same for both SAN and LAN/WAN libraries.
See “

Unmanaging a SAN or LAN/WAN Library

” on page 78.

Managing a SAN Library

To manage a SAN library:

1.

Open the

Automigration/Replication

tab.

2.

From the task bar, select

Manage SAN Automigration Library

.

The screen displays all eligible libraries. Libraries that appear on the list but are greyed out either
have no drives or have multiple drive types and therefore cannot be managed. Also, if there are
no unmanaged drives, the system will return the message, “There are no unmanaged libraries.”

3.

If the library you wish to manage is not already selected, select it now.

NOTE:

You can only select one library to manage at a time. To manage additional libraries, repeat
the procedure for each library to add.

4.

Select

Submit

.

The

Destination Library Details

screen displays, with the message, “The library, [library name],

was managed successfully.”

You can now create pools for the library and manage your data on the library using automigration.

You can also unmanage the library at any time. See
“

Unmanaging a SAN or LAN/WAN Library

” on page 78 for instructions.

Managing a LAN/WAN Replication Library

To manage a LAN/WAN replication target:

1.

Select the

Automigration/Replication

tab.

The

Summary for All Managed Destination Libraries

screen displays.

2.

Select

Manage LAN/WAN Replication Library

from the task bar.

3.

Enter the name or IP address of the host containing the LAN/WAN replication target you just
created.

4.

Select

Submit

.

5.

On the next screen, select the LAN/WAN replication target to manage.

6.

Enter the password you created for that target.

7.

Select

Submit

.

The LAN/WAN replication target is now associated with the source.

You must re-manage a LAN/WAN replication target if you change the password for security reasons.
To re-manage a LAN/WAN replication target:

HP StorageWorks

77

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands