manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 240

Status

Internal health
LED color

HP Systems In-
sight Display LED
and color

Invalid online spare memory configuration.

Red

Online spare
memory (flashing
amber)

Online spare memory enabled and not failed.

Green

Online spare
memory (green)

Bank X failed over to the mirrored memory bank.

Amber

Mirrored memory
(amber)

Invalid mirrored memory configuration.

Red

Mirrored memory
(flashing amber)

Mirrored memory enabled and not failed.

Green

Mirrored memory
(green)

The Health Driver has detected a cautionary temperature level.

Amber

Overtemperature
(amber)

The server has detected a hardware critical temperature level.

Red

PCI riser cage is not seated.

Red

Riser interlock (am-
ber)

One fan is failed or removed.

Amber

Fan module (amber)

Two or more fans have failed or are removed.

Red

Hard Drive LEDs

Description

Item

Fault/UID LED (amber/blue)

1

Online LED (green)

2

Component Identification

240

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands