manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 306

Document Conventions and Symbols

Table 15 Document Conventions

Element

Convention

Cross-reference links and e-mail addresses

Blue text: 

Table 15

Web site addresses

Blue, underlined text: 

http://www.hp.com

•

Keys that are pressed

•

Text typed into a GUI element, such as a box

•

GUI elements that are clicked or selected, such as menu
and list items, buttons, tabs, and check boxes

Bold

 text

Text emphasis

Italic 

 text

•

File and directory names

•

System output

•

Code

•

Commands, their arguments, and argument values

Monospace 

 text

•

Code variables

•

Command variables

Monospace, italic 

 text

Emphasized monospace text

Monospace, bold 

 text

WARNING!

Indicates that failure to follow directions could result in bodily harm or death.

CAUTION:

Indicates that failure to follow directions could result in damage to equipment or data.

NOTE:

Provides additional information.

The following equipment symbols may be found on hardware to which this guide pertains. They have
the following meanings:

WARNING!

 These symbols, which mark an enclosed surface or area of the equipment, indicate the

presence of electrical shock hazards. The enclosed area contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards, do not open this enclosure.

Support and Other Resources

306

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands