manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 174

NOTE:

The password can also be changed from the VLS CLI. See 

CLI Management commands

.

Managing Cartridges

You can change the following parameters for existing cartridges from the Cartridge Parameters
window:

•

Library with which they are associated

•

Capacity

•

Write access

Unloading a Cartridge from a Drive

If a tape becomes stuck in a drive and cannot be removed using the backup application, unload the
tape using Command View VLS:

1.

Select the tape drive from the navigation tree

2.

From the task bar, select

Force Unload

.

This will return the tape to its original slot.

NOTE:

Upon reboot of the VLS or restart emulations, all cartridges that were in drives will NOT be returned
to their original slots. They will be loaded back into the drives. Use 

Force Unload

 to return them to

their original slots if needed.

Freeing up Storage Space

Storage space can be freed up by erasing the data on or destroying virtual media that is no longer
used, such as:

•

Cartridges that are no longer used by a backup application

•

Cartridges that have been moved to the Firesafe that are no longer needed

Use the backup application to erase data on virtual media that is no longer used.

Destroy virtual media that is no longer needed using Command View VLS. See
“

Destroying Cartridges

” on page 170.

NOTE:

Reducing the size of the cartridges in a virtual library will not free up disk space. Storage space is
dynamically assigned by the VLS as it is used. It is not reserved.

Management

174

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands