manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 254

Status

Fault/ID LED (am-
ber/blue)

Online LED (green)

The drive is offline or the disk array is powered down.

Off

Off

Rear Panel Components

Description

Item

Power supply bay 0

1

Controller module

2

VHDCI connector

3

Fan module 0

4

Fan module 1

5

Power supply bay 1

6

WARNING!

Do not use the handles on the power supply units to lift or hold the disk array. These handles are
designed only for holding the power supply units or removing them from the disk array, not for
supporting the weight of the disk array.

Rear Panel LEDs and Buttons

Description

Item

Arrow buttons (not used)

1

Component Identification

254

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands