manualshive.com logo in svg

HP StorageWorks 6000 - Virtual Library System, User Manual

Share
Download
HP StorageWorks 6000 - Virtual Library System User Manual Download Page 165

5.

Click

Next Step

.

The next

Tape Drive Parameters

window opens (

Figure 73

).

Figure 73 Create Virtual Library Wizard window (6 of 12)

.

6.

Enter the number of tape drives you want to create in the library at this time in the

Tape Drives

box, if different from the default value.

You can add more tape drives to the library later. The

Tape Drives

box defaults to the standard

number of drives for the library type.

NOTE:

All the tape drives created at one time are mapped to the same Fibre Channel host ports.
Make sure to load-balance the tape drives across the Fibre Channel host ports to obtain
maximum performance. Tape drives in a library do not have to be mapped to the same
port as the library.

7.

To enable software data compression for the tape drives on the VLS6100, VLS6500, or VLS6800,
select

Enable Compression

.

Software data compression (2:1) is performed only on data handled by tape drives with data
compression enabled. Data compression allows the VLS to store more data.

Hardware data compression is used on the VLS6600; therefore, software compression is not
used.

NOTE:

A tape drive created with data compression enabled cannot be changed to disabled later.

8.

Click

Create Tape Drive

.

A summary window opens and displays details about the tape drives created.

HP StorageWorks

165

Summary of Contents for StorageWorks 6000 - Virtual Library System







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands